About INDECO | Facade Manufacturer in Foshan, China

ABOUT INDECO

Facade engineering and manufacturing, from one roof in Foshan

INDECO designs, fabricates and delivers kinetic facades, unitised glazing and aluminium cladding for commercial and civic buildings worldwide — engineering, fabrication, performance testing and logistics under a single roof.

INDECO BUILDING MATERIALS COMPANY (佛山亿斐进出口有限公司) has supplied facade systems since 2021, with references across the Middle East, Africa and Asia. This page is the company's single source of truth: who we are, where we manufacture, what we are certified to, and what a project actually gets when it is built with us.

INDECO facade production facility in Foshan, Guangdong, China

The INDECO facility in Foshan, Guangdong — cutting, bending, welding, anodising and PVDF coating under one quality system.

THE COMPANY AT A GLANCE

One facility, three systems, forty-plus markets

2021

Founded in Foshan, Guangdong

12,000 m²

Single-roof facility in Foshan

3

Signature systems: kinetic, glazing, cladding

40+

Export markets served factory-direct

500,000 m²/yr

Annual facade & cladding output capacity

5

Production lines under one roof

HOW A PROJECT RUNS

Four stages, one roof, one accountable team

1 · Engineering

Shop drawings, structural calculation and interface detailing — movement joints, slab connections and glass replacement access are resolved before fabrication.

2 · Fabrication

Cutting, bending, welding, anodising and PVDF coating in-house, so finish, tolerance and colour batch stay under one quality system.

3 · Performance testing

Air, water and structural wind testing to ASTM E330 / E331 and EN 12152, plus neutral salt-spray to ISO 9227 for coastal specifications.

4 · Logistics and site

Factory-direct packing, shipping documentation, authority-approval packs and installation supervision where the scope calls for it.

CERTIFICATIONS AND COMPLIANCE

What we are certified to

Documentation is prepared per market, not per order — the same test evidence and certificate set is reissued for the authority that will review it.

Certificate / standardScope
ISO 9001Quality management covering design, fabrication, inspection and logistics
CE MarkingEU Construction Products Regulation conformity for facade products
A2-s1,d0 (EN 13501-1 / GB 8624)Non-combustible-grade solid aluminium cladding
QUALANODAnodising quality: controlled oxide film thickness and colour consistency
AAMA 2605Highest-performance PVDF coating for exterior colour and chalk resistance
ASTM E330 / E331 · EN 12152Structural wind load, water penetration and air leakage of curtain wall assemblies
ISO 9227 · ISO 9223Neutral salt-spray up to 4,000 hours; C4/C5 corrosivity classes for coastal sites
Mostadam · Saudi Building CodeGulf green-building and structural/fire alignment for Saudi projects
Four-performance (4P) test report
No. F2023(59)0015 · CNAS L3898
Air tightness, water tightness, wind resistance and in-plane deformation of a representative curtain-wall assembly, tested by a CNAS-accredited third-party laboratory to GB/T 15227-2019 & GB/T 18250-2015 — all four properties meet national-grade requirements. Client and project details withheld.

Full certification detail →

COMPANY FACTS

The record, in one table

Stated once, here, so that directories, profiles and citations can be checked against a single source.

Legal nameINDECO BUILDING MATERIALS COMPANY
Chinese name佛山亿斐进出口有限公司
Founded2021 — Foshan, Guangdong, China
HeadquartersRoom 1806, 18/F, Block A5, Jinying Green Island International Center, 133 Lake Jihua West Rd, Foshan, Guangdong 528000, China
Facility12,000 m² single roof — engineering, fabrication, performance testing and logistics
SystemsKinetic louver facade · Unitised glazing curtain wall · Aluminium cladding and ceilings
Markets40+ export markets; references in the UAE, Qatar, Saudi Arabia and Kenya
CertificationISO 9001 · CE · A2-s1,d0 · QUALANOD · AAMA 2605
Contact[email protected]

COMMON QUESTIONS

Questions buyers ask before a first call

Is INDECO a manufacturer or a trading company?

Both, deliberately. INDECO BUILDING MATERIALS COMPANY operates a 12,000 m² production facility in Foshan where engineering, fabrication, performance testing and logistics sit under one roof. Systems are sold factory-direct, which is why test evidence and shop drawings come from the same team that builds the units.

Where is INDECO based, and which markets do you serve?

The company is headquartered in Foshan, Guangdong, China, and supplies more than 40 export markets. Project references are concentrated in the Middle East and Africa — the UAE, Qatar, Saudi Arabia and Kenya — with delivery worldwide.

Which facade systems does INDECO supply?

Three: kinetic louver facades (passive, wind-responsive shading with no power or control system), unitised glazed curtain walls (factory-sealed Low-E modules, tested for air, water, wind and movement), and aluminium cladding including solid A2-s1,d0 panels, soffits and ceiling systems.

What certifications can INDECO document?

ISO 9001, CE marking under the EU Construction Products Regulation, A2-s1,d0 fire classification to EN 13501-1 / GB 8624, QUALANOD for anodised finishes, AAMA 2605 for PVDF coatings, and assembly testing to ASTM E330 / E331 and EN 12152. For Gulf projects we align documentation to Mostadam and the Saudi Building Code.

How do I get an indicative price?

Send elevations or a typical floor plan, the site city and exposure, and the performance targets (U-value, SHGC, acoustic rating, fire class). An engineer — not a sales desk — replies within 24 hours with a recommended system, the applicable test standards and an indicative price band. The contact page lists exactly what to include.

Working on a facade package?

Send the drawings and the site conditions. We will come back with the system, the test basis and an indicative number.

Send your project brief